Soggy conditions: A good time to assess drainage systems

Text Size: AaAaAaAaAa

Hello everyone! This has been a cool, wet and frustrating spring for Bureau County farmers. According to the National Agricultural Statistics Service, only 10 percent of Illinois corn has been planted as of May 10. Last year at this time, 55 percent of the corn crop had been planted, but normally, 84 percent of Illinois corn is planted by now. This is a slow start, but it is also a good time to take advantage of the wet conditions and to make a critical assessment of your farms’ drainage systems.

According to Jay Solomon, an engineering technology Extension educator, this is a great opportunity to show absentee landlords the extent of the drainage problems in their fields. In addition to the obvious standing water, a lot of soil erosion has occurred in many fields. A discussion of the yield impacts from these conditions could help landowners better understand the need to invest in an improved drainage system. Good documentation will help to demonstrate the extent of the problems/damage. Create a map with long-term references, and if possible, use GPS coordinates for maximum precision.

Drainage systems may incorporate surface and subsurface drainage components. Soil type and topography make a difference in the type and amount of drainage a field may need. According to the Illinois Drainage Guide, tight soils and steep topography will respond best to a surface drainage system. Most level soils with good hydraulic conductivity will respond well to subsurface drainage. Frequently a combination of surface and subsurface drainage will produce the best results.

Surface drainage utilizes shallow-grass covered ditches to remove the runoff from the field to lateral ditches and outlet channels. The grass waterways are designed to allow farm implements access during most of the year. Lateral ditches and outlet channels tend to be deeper with steep sides requiring bridges to cross in most cases. These structures must be constructed and maintained carefully to prevent erosion damage.

Subsurface drainage tile can be installed in random, parallel or herringbone patterns based on the topography and water to be removed. Random systems have been the traditional method used to dry “wet” spots in the fields. A herringbone pattern works well in narrow depressions. Parallel systems have generated considerable interest as a way to increase productivity for flat, regularly shaped fields. These systems could be used to control the water table under a field and promote better yields during wet years.

Previous Page|1|||

Comments


National Video