Wall-mounted sliding door 'reflects' a genius design solution
(BPT) - Like many couples who share a bathroom, one Arizona couple was frustrated by the space that was compromised by a swinging bathroom door. The open door swung into the bathroom vanity and took up too much space in a very traditional bathroom.
The couple turned to Board by Board, an Arizona kitchen and bath design company, to give their bathroom more space and an updated, clean design. Board by Board created a design that would incorporate a sleek, contemporary double mirrored sliding door with Wall Mount Hardware.
“The interior wall next to the swinging door had a built-in vacuum system that prevented us from using a traditional pocket door,” says Christie Board, kitchen and bath designer. “I had seen wall-mounted doors in magazines and have always loved the idea of incorporating this design into a remodel project.”
One of the challenges of using wall mounted doors was finding the “right” door. Since this was a master bathroom, the door needed to fit the clean decor of the bathroom and the master bedroom.
After much searching, Board found a one panel door and took the door to a glass company to have the door fitted with double-sided, full-length mirrors. Finding the right door was like finding a puzzle and putting the right pieces together, says Board. And the result was a simple design solution that looked ideal in both the bathroom and bedroom.
Board chose to use a valance for the door tracks on the wall mount hardware because she believed that the cleaner look would fit nicely with the master bedroom.
To handle the double sided mirrored sliding door, Board used 2610F series Wall Mount Sliding Door Hardware. The mirrored door brings a “cool” looking design element to each room. The Arizona couple is thrilled that the bathroom door conflict is solved with such a beautiful design.
The 2610F wall mount hardware features a heavy walled-aluminum door track that is precision extruded for smooth operation and can hold up to 200 pounds of door weight. The convex rail design provides single-point hanger wheel contact for low “feather touch” roll resistance. And designers and do-it-yourselfers love the box track design which prevents rollers from jumping the track.
Board has used the Wall Mount Hardware a few times since this bathroom design and mentioned that she is getting ready to do this in her own home. However, Board is going to go with the exposed wall mount, rather than the valance because she wants a more contemporary look.
“I have used Johnson Hardware products in home remodeling projects and have always had fantastic results,” says Board. “This was a cost-effective, space-saving, simple solution and I will continue to use this brand in the future.”